Spare 24V Lithium Battery Powered Heavy Duty Stair Climbers- CT420SC | CT420C | CT310 and Electric Lifting System ELS420

Compatible Model: CT420SC / CT420/ CT310 and Electric Lifting System ELS420

• Compatible Model: CT420S/ CT420/ CT300A and Electric Lifting System
• Installing the battery: Install the battery pack downwards. After inserting the battery and press the power on switch, the machine be powered automatically, no need extra cable connection.
• Check Battery Capacity: When screen is displayed as 100% (some models are displayed as 8 grids), it is fully charged. When the power display is less than 20% (part of the models display 3 grids), it means that the power is low. You should charge or replace the battery. When the power is displayed as 10% (part of the models display as 1 grid)
• Please install the battery fuse before use. Battery is an important part of the machine, please use it correctly and protect it properly.
• The special charger configured by the company must be used for charging, and the fast charging station shall not be used for charging.
• The battery should be fully charged before the first use. When the battery is found to be insufficient after use, it should be charged in time. It is best to form the habit of charging after each machine use, which is beneficial to the service life of the battery.
• When the battery is stored for a long time, it should be fully charged and discharged once a month, so as not to affect the performance and life of the battery. It is recommended to check and maintain at the professional service repair station regularly.
• Battery Storage: When the battery pack to be long-term stored, charge the battery pack to about 50% of capacity, store in dry and ventilated place, charge for every 3 months.
• The battery pack and charger should be stored in clean, dry and ventilated place, avoid contacting with corrosive materials and be away from fire and heat. The charging temperature range is 0-40℃. If the range is exceeded, the battery performance will be reduced and the battery life will be reduced. The batteries that have been stored for a long time must be charged before use.
• Transportation: The battery pack and charger should be packaged for transport, prevent excessive vibration, shock or extrusion in transport process and prevent the sun and rain.